Firepro New Zealand
  • 1
    About Firepro
    Where are We
  • 2
    Fire Stop Barriers
  • 3
    Fire Grills, Dampers
    Collars & Wraps
  • 4
    Door & Window Seals
    & Components
  • 5
    Fire Protection
    for Ducting
  • 6
    Steel Fire Protection
  • 7
    Construction Seals
    & Sealants
  • 8
    Access Hatches
  • 9
    Acoustic & Thermal
    Insulation
  • 10
    Fire Retardant
    for Fabric


Fireboards for Steel Protection
Firepro B400
Firepro B400 Spiralite is a comprehensive fire protection system for structural steel which uses a unique spiral screw fixing system method to give fast, clean and cost effective installation for up to 2 hours fire protection. This dry fixing system avoids all the associated mess and the additional labour time taken by the traditional glue method of fixing. The easy hand tool application also allows for quick visual quality control checks. SPIRALITE is tough and durable and has excellent thermal qualities. The 200kg density board ensures a robust and resilient installation. Furthermore, SPIRALITE is vermin resistant and does not run the risk of deterioration after the area is closed off. SPIRALITE repels moisture and does not degenerate when exposed to weather elements during construction.
Sheet Sizes: Plain: 2000mm x 1200mm x 20,25,30,40, & 65mm Foil-faced: 2000mm x 1200mm x 20,25,30,40, & 65mm 1800mm x 1200mm x 30, & 65mm
b400fixing.pdf (1274939 Bytes) Download
b400spiralite.pdf (342454 Bytes) Download
Firepro B410
Knauf Structural Steel Fire Protection Formerly marketed in NZ under the name of Gib® Fireboard Fireboard provides passive fire protection in accordance with the requirements of NZBC C3. Fireboard is non-combustible to BS 476, Part 4, 1970. Fireboard Systems for structural fire protection have been tested to BS 476, Part 21, 1987.
Sheet Sizes: 2000mm x 1200mm x 25mm x 20Kg/M2 2000mm x 1200mm x 20mm x 16Kg/M2
b410.pdf (687989 Bytes) Download
High Performance Coatings for Steel
Firepro C626
Firepro C626 is a 2 pack epoxy zinc rich primer providing exceptional corrosion resistance in harsh exposures. Recommended for use over abrasive blast cleaned steel surfaces in most harsh environments.
Provides good corrosion protection in severe weather conditions. Quick turnaround time for applicators, very rapid cure for epoxy. Suitable for use in high temperature environments. Excellent durability, abrasion, chemical & solvent resistant.
c626.pdf (66731 Bytes) Download
Firepro C627
Firepro C627 is a red primer giving corrosion protection in one coat. This steel primer is not in itself a fire protective coating.
c627.pdf (65730 Bytes) Download
Firepro C628
Firepro C628 Fast drying high quality red oxide single pack zinc phosphate alkyd primer for corrosion protection of steel. Steel should be overcoated with intumescent basecoat within 3 days. This steel primer is not in itself a fire protective coating.
c628.pdf (70516 Bytes) Download
Intumescent Coating for Cables
Firepro C696
Firepro C696 is an aqueous intumescent fire retardant coating for cables with plastic casing, to reduce the danger of spread of fire along the cables.
c696.pdf (63721 Bytes) Download
Intumescent Coatings for Steel
Firepro S605 & S606
A paint like coating system for the protection of structural steel. The steel is primed and then one or more coats of the S605/S606 intumescent basecoat applied. For external use and some internal applications, such as moist areas, where mechanical damage is possible, and when required for decorative purposes a Topseal is applied.
s605_s606.pdf (110224 Bytes) Download
Firepro S707
Firepro S707 is a waterborne intumescent coating systems for fire rating structural steel.
S707 Datasheet.pdf (55674 Bytes) Download
Structural Steel Protection
Cafco 300
Cafco 300 is a gypsum/vermiculite based spray used to fire protect structural steel. It can be pumped in its slurry form for over 100m to the point of application. It is delivered to site in powder form and mixed with water to form a slurry in the spray machine.
White textured finish, can be trowelled flat.
cafco300.pdf (451760 Bytes) Download
Topseal Coatings for Steel
Firepro C622
Firepro C622 is a high quality single pack modified alkyd topcoat for use over Firepro intumescent coating for the fire rating of structural steel. This topseal is not in itself a fire protective coating. C622 is a coating formulated to provide chemical, abrasion and weather resistance. C622 is available in gloss and semi-gloss and metallic finishes. Stocked in white gloss. May be tinted to BS colours.
SHELF LIFE: Up to 12 months if stored in unopened containers in cool dry conditions. THEORETICAL COVERAGE: 8 square metres per litre. DFT 40µm DRYING TIMES: At 25°C allow 4-8 hours before recoating.
c622.pdf (61984 Bytes) Download
Firepro C623
Firepro C623 is a high quality single pack 100% pure acrylic finish coat approved for use as part of Firepro Intumescent Coating Systems for the fire rating of structural steel. This topseal is not in itself a fire protective coating. C623 is a coating formulated to provide chemical, abrasion and weather resistance.
C623 is available in gloss and semi-gloss finish, stocked in white gloss, may be tinted to BS colours.
c623.pdf (60712 Bytes) Download
Firepro C624
Firepro C624 is a high quality, two pack, UV protected, interior/exterior coating with a very hard and durable finish, for use over Firepro C963, C608 and C609 intumescent coatings for the fire rating of structural steel. This topseal is not in itself a fire protective coating.
COVERAGE RATE: 6-8M2 per litre per coat 1 coat minimum 2 coats for exterior applications.
c624.pdf (63353 Bytes) Download
Copyright © Firepro Centabuild Ltd
Website design by Round Orange