Astragal & Security Seals Double door meeting style seals.
AT1212 incorporates an FP1212 acoustic and smoke seal.
ATB incorporates a polypropylene brush seal.
astragal_security.pdf
(107946 Bytes)
Download
|
RM & RH Series Door Bottom Seal RM & RH Series Door Bottom Seals are automatic door seals, lifting the seal from the floor as the door opens.
Suitable for door widths from 710mm to 1220mm.
rmseals.pdf
(230676 Bytes)
Download
rhseals.pdf
(98731 Bytes)
Download
|
Brush Pile Seals Polypropylene brush seals are common pile seals used with timber, aluminium, and PVC joinery.
Polypropylene will not rot, is UV, chemical and weather resistant, and has exceptional abrasion resistance.
Both Standard Brush Pile and Brush Pile with central fin are available. Finned seals offer superior acoustic and water resistance.
Brush heights from 3mm to 14mm depending upon style.
brushpileseals.pdf
(171605 Bytes)
Download
|
Intumescent Fire Door Seal BPDL Series Door Bottom Seal is an intumescent fire door seal with either brush or sweep action.
intudoorseals.pdf
(97189 Bytes)
Download
|
Roller & Tilt Door Seals Door Bottom Seals have been designed for the bottom of Roller and Tilt Doors as a barrier to water, draft, and dirt.
doorbottomseals.pdf
(106922 Bytes)
Download
|
Glazing Tape & Strips Ceramic and Intumescent Strips and Tape.
Intumescent Strips.pdf
(95766 Bytes)
Download
glazingsystem.pdf
(1865184 Bytes)
Download
ceramicfelt.pdf
(60199 Bytes)
Download
|
System 36/6 System 36/6 is an intumescent, elastomeric glazing gasket suitable for most commonly used glass in fire resistant systems.
system36.pdf
(106697 Bytes)
Download
|
System 90 System 90 can achieve greater fire resistance than the system 36/6. Using Georgian Wired Glass 2Hr FRR has been achieved.
system90.pdf
(141765 Bytes)
Download
|
Large Brush Seals Nylon Brush Seals have more rigidity than polypropylene allowing them to span larger gaps. This makes them ideal for stopping insects, birds, etc on revolving doors and the top of sliders or roller doors. They are also useful as spray deflectors on vehicles and the nylon bristle is a halogen gas barrier.
Bristle is available in black in lengths from 13mm to 50mm.
largebrushseals.pdf
(133096 Bytes)
Download
|
Compression seals Compression seals are available with aluminium and PVC holders. PVC has good weathering characteristics and withstands UV well. It has been used successfully with most common building materials (except polycarbonate sheet).
pvccompseals.pdf
(122862 Bytes)
Download
|
Sweep Seals The FP0511 is an excellent acoustic, privacy, and cold & medium smoke seal.
The DLU series is primarily an under door seal, also suitable for sliding doors.
pvcswpseals.pdf
(79533 Bytes)
Download
|
QLon Seals QLon is an especially formulated thermoset urethane open cell cushion material with a tough polypropylene cover, is UV stabilised, compression set resistant, solvent and paint resistant. It has excellent temperature and weather sealing performance and is an effective barrier to air movement. Durability is exceptional.
qlonseals.pdf
(137821 Bytes)
Download
|
Silicone Seals Silicone Seals are available for most holders allowing usage in higher temperature situations.
siliconeseals.pdf
(182972 Bytes)
Download
|
Intumescent Fire Door Seals Intumescent Fire Door Seals are easily fitted to new or existing doors to improve their fire performance or smoke control capability. Fire Door Seals are composed of an intumescent core, which provides the fire resistance, encased in a rigid PVC casing and are available with an optional smoke control brush.
Available in Bronze
Length: 2.1 Metres
intfireseals.pdf
(324330 Bytes)
Download
|
Smoke Seals Smoke Temperature Definitions are not universal and may differ between seal manufacturers. The definitions we use are:
HOT 500°C and over. Hot Smoke Seals need to deal with Hot, Medium and Ambient smoke. They normally incorporate an intumescent seal and an ambient smoke seal. Our BP range of seals are examples.
MEDIUM 200°C ± 20°C. Medium Smoke Seals include the hot smoke seals above plus the silicone seals which are deemed to comply with temperature requirements for medium smoke.
AMBIENT 25°C ± 15°C. Ambient (Cold) Smoke Seals include the hot and medium seals above plus our range of Brush Pile Seals.
hmcsmokeseals.pdf
(165442 Bytes)
Download
|