The Fire Stop Box is an intumescent type product designed to prevent the spread of fire through service penetrations. Think of them as fire rated holes. They have been tested rigorously with a multitude of service types, service configurations, and wall and floor types.

P240 Ceramic Wool Blanket is a high temperature flexible insulating material. It is lightweight and soft to touch. It has good refractory, fire stopping and insulation properties. It is also used for filtering hot gases and liquids. For most uses 25mm thick blanket of 96Kg/M3 density is required.

Down-lights used in fire-rated ceilings are subject to fire regulation. The FF109 Downlight Cover has been developed to provide maximum protection and ease of fitting for small/medium sized downlights.

Recessed halogen downlights are used in many homes and businesses. Although they give the attractive crisp white light which makes them very popular, they also represent a potential fire hazard, especially when buried in loft insulation.

Allows the reinstatement of fire ratings where holes have been made in firewalls and floors. Up to 2 hours FRR.

Used wherever openings require reinstatement whether or not penetrated by pipes or cable services.

When correctly installed, B360 provides up to 2hrs and B361 up to 1hr F.R.R. in plasterboard walls of equivalent fire resistance. B362 are the insert pads only.

A one-part fire-rated sealant to perform as a barrier against fire penetrating expansion joints. Cleans-up in water. With an acoustic rating of STC65. For gaps up to 50mm depending upon joint type.

A one-part, waterborne, high performance interior/exterior fire protective and acoustic sealant. Cleans-up in water. With an acoustic rating of STC55.

A fire rated, single component, polyurethane sealant curing via air humidity to form an elastomeric weatherproof fire rated seal. Recommended Uses: Sealing joints in expansion and construction joints in precast concrete. Sealing joints in insitu concrete, block and brickwork. Penetrations in areas requiring intumescent sealing. Sealing acoustic jointing.

Firepro Intumex is a fire stopping compound for application in firewalls and floors, mainly around penetrating items. It is hard-setting, lightweight and simple to apply. It is supplied as a pre-mix powder that water is added to, forming a mortar.

A flexible, fire resistant barrier for seismic & other movement gaps in walls and floors. Fire resistance ratings of 2Hrs for gaps up to 100mm and 1Hr rating for gaps to 130mm. NOTE: All joints to be sealed with intumescent sealant.

A flexible fire resistant barrier strip providing up to 2 hours fire protection, sold in bundles of 10. NOTE: All joints to be sealed with intumescent sealant.

A fire stopping system for application to voids between slabs and curtain walls. NOTE: All joints to be sealed with intumescent sealant.

These strips are primarily designed for filling the gap between the top of firewalls and the roof or beams. NOTE: All joints to be sealed with intumescent sealant.

L Bracket available from 60mm up to 190mm Z Bracket available from 25mm up to 190mm

The FF102 Ventilated Fire Barrier is a high expansion intumescent seal offering industry leading performance as a ventilated cavity fire barrier.